- Shop
- About
- Clearance sale
- Project
- News
- Recruitment
- Contact us
- Agency policy
- Technical assistance
Safety warning for PVC stone-patterned wall panels.
1. Before installing PVC stone-patterned panels
PVC stone-patterned panels are for interior decoration only and are NOT for exterior use or flooring.
The ground surface must be flat, the difference does not exceed 2mm/1m
Clean the surface before installation. If installing directly onto a cement wall, apply mastic to ensure better adhesion of the panels.
Only install the stone-patterned panels directly on a flat and dry wall; in all other cases, a frame must be constructed and a layer of foam added in between before installation.
2. During the installation of PVC stone-patterned wall panels.
Skeleton Warning
Frame material: Stainless steel bar, galvanized square steel bar, plastic beam, or aluminum plaster U-shaped bar
Bar spacing not more than 50cm (≤50cm)
Welds need to be smoothed and painted with anti-rust paint.
Safety warning about glue and nails.
Apply Kosmos interior adhesive in a zigzag pattern to the back of the panel, tape the four corners, and evenly distribute the adhesive along the edges.
Nail in hard-to-see locations such as prominent ridges and high places.
Warning about PVC stone-patterned ceiling panels.
PVC stone-patterned ceiling panels require a frame structure and a foam sheet between the frame and the panel.
After installing the panels on the ceiling, use individual supports for each panel for at least 72 hours to ensure they are securely fastened.
Warning regarding the placement of accessories for PVC stone-patterned panels.
Table of uses for accessories for faux stone PVC
Accessory name | Uses |
Bare neck | Cover the intersection between wall and ceiling |
Wall back cornice | Wall back decoration |
Decorative floats | Create decorative borders for walls and door frames. |
Negative Angle | Decorate the corner of the wall |
End trim / Finishing molding | Cover the end of the panel |
Splints | Decorate the right-angled corner. |
Skirting board | Conceal the intersection between the wall and the floor. |
Splint | Join the material sheets together and cover the gaps and joints. |
3. After installing the PVC stone-patterned wall panels
Do not drag heavy, sharp, or pointed objects on the surface of the panel.
Do not use sharp objects to clean the panel surface.
Use a mild cleaning solution, diluted with water, with a pH of 6-8 to clean the product.
Use a damp, wrung-out cloth to wipe the panel; do not pour water directly onto the marble surface.
Do not let rain splash on the panel
Suitable temperature for the panel is not more than 50℃, should not be placed near high heat sources (eg: coal stove, gas stove,...)
Periodically every 3-6 months, check the construction for loose glue or screws.
Office: 281 Tan Son, Tan Son Ward, Ho Chi Minh City
