Fraud Blocker

Instructions for constructing plastic stairs - covering the stairs properly

Construction of plastic stairs is the process of installing and completing stairs using PVC plastic materials. This process includes these steps:

  • Prepare premises and materials
  • Measure and cut supplies.
  • Attach plastic stair treads.
  • Plastic stair treads.
  • Covering plastic stair treads.
  • Apply glue to the edge.

Step 1: Prepare the site and construction materials

The preparation site for construction needs to be clean and flat. Construction materials include:

  • Plastic stair treads.
  • Plastic stair treads.
  • Antique plastic stair steps.
  • Cosmos bond.
  • Cutting machines.
Prepare the site and construction materials for plastic stair treads
Prepare the site and construction materials for plastic stair treads

 

Step 2: Measure and cut the plastic stair tread

Use a ruler and cutter to measure and adjust the size of the step collar, step brace and PVC plastic step surface to fit the size of the stairs to be covered.

Measure and cut the plastic stair tread
Measure and cut the plastic stair tread

Step 3: Cut and join the stair treads with glue

In order to not expose the cut surface, both the splint and the plastic stair tread need to be beveled at a 45 degree angle and joined tightly with specialized glue.

Cut and assemble plastic stair treads with glue
Cut and assemble plastic stair treads with glue
Construction of wooden plastic stair treads is more beautiful when installing strips
Construction of wooden plastic stair treads is more beautiful when installing strips
How to cut and join stair step molding number 2
How to cut and join stair step molding number 2

Step 4: Cover the neck of the plastic stairs with glue

We spread the glue evenly on the back of the stair tread in the corresponding position.

 

Note:

  • We cover the neck of the stairs first and then attach the tread.
  • Perform installation from bottom to top.
  • Pat gently with a rubber hammer so that the product fits tightly onto the stairs.

Step 5: Cover the plastic stair treads with glue

We can evenly apply glue directly onto the stairs or to the back of the plastic stair tread plate. Install the sheet in the corresponding position and then gently tap it with a rubber hammer.

Step 6: Install at the stair landing

The landing is the largest step, arranged in the middle of the stairs so that people going up/down can rest. Because plastic stair treads are limited in size, we can Use a plastic stair tread to connect the landing.

Installed at the stair landing location
Installed at the stair landing location

Step 7: Apply edge glue to complete

Apply glue to the edges and gaps to protect the panels from dirt and ensure a strong bond.

Note: the glue used is non-acidic to ensure the product does not corrode.

Apply glue to finish the plastic stair treads.
Apply glue to finish the plastic stair treads.

After completing the 7 steps above, you will have one Wooden imitation plastic stairs with high aesthetics, low maintenance costs and durability up to 15 years. If you have any questions, you can contact us via number 0903059676 Kosmos staff will advise you more carefully and specifically.

0903.093.221
0932.067.388