Instructions for construction and installation of Pergola cylinder head cover

Pergola column head cover made of wood and plastic is a material made from wood powder, plastic powder and additives. The product is also known as a pillar end cap, Pergola trellis cap, wood-plastic slat cap, with a hollow design, used to cover the head of the Pergola pillar, helping to protect the pillar from the harmful effects of weather such as rain, sun, dust, insects crawling into the pillar core, ... at the same time also contributing to increasing the aesthetics of the Pergola. It looks simple but there are 3 ways to install the pillar end cap including:

• Construction and installation of Pergola cylinder head cap of the same size
• Install a cylinder head cap of a different size
• Installed in the style of a mother holding her child

The article will detail each method below!

Install the plastic wood Pergola column head cap of the same size

Structure the cylinder head cap like a wine cork with 2 parts: the cap core and the cap top. The core of the cap fits inside the column of the corresponding size. The top of the cap is square in shape, covering the entire column cross-sectional area. The cap core and the cap head are attached together with extremely strong screws.

Install a cylinder head cap of a different size

We install the large cap on the small pillar to create a highlight for the project. At this time, the open lid sticks out from the pillar like an umbrella canopy. However, you need to disassemble the cover core to cut it so it fits into the cylinder core. In addition, you can completely remove the lid core, at which point the lid is 100% fixed thanks to the glue.

Installing “mother holding baby” – Impressive pillar head highlight

The mother-holding-child installation style applies multi-layered architecture from large to small. This installation method applies to large plastic wood pergola pillars with corresponding large pillar caps, then use a smaller sized pillar cap on top. Note, you must apply glue evenly to the underside of the cylinder cover to increase adhesion.

Previously, when cylinder head caps were not yet invented, workers used many patchwork methods to cover cylinder heads. Patchwork styles require highly skilled workers to maintain the aesthetics. Now, cylindrical end caps have been introduced with appropriate sizes, making the construction of pier end caps not only easy but also aesthetically guaranteed.

>>> See more video instructions for installing plastic wooden cylinder head caps here:

Top Q&A

How much does a plastic wooden Pergola column head cap cost?

Price Pergola column head cover made of wood and plastic (updated 3/2024) fluctuates approx 240.000 - 270.000 VND/piece.

Advantages of plastic wood Pergola column head caps?

The Pergola head cap is a plastic wood material. Therefore, they also have 7 outstanding advantages outdoor plastic wood.

Guide Construction and installation of Pergola cylinder head cover not too difficult to do. Distributors plastic wood Viet Nam Kosmos Joint Stock Company have provided the set plastic wood accessories for the project to be completed thoroughly and beautifully. Contact Kosmos immediately via Hotline (+84) 903 093 221 to own the cylinder head cover for your project right now!