Fraud Blocker

Korean molding news

Professional guide to construction of ceiling panels

Kosmos will guide construction of ancient ceiling for you to do it professionally. Since then, your installation of this interior decoration material will become more sophisticated and aesthetic than ever.

Choose the right ceiling molding

Before proceeding construction of ancient ceiling Then we need to choose the type of molding that matches the surrounding furniture. The ceiling beam is a decorative material floating on a flat wall surface, located at the junction between the wall and the ceiling. It conceals the defects of the wall/ceiling, for the beauty of the finished work.

Currently, molding is made by many different materials. In the immediate future, pvc or ps ceiling panels are most commonly used because of their durability and aesthetics. You should choose the color and shape mAncient neck consistent with the design, the main color of the project.

The white ceiling fender is suitable for the works according to the pure white concept
The white ceiling fender is suitable for the works according to the pure white concept

Prepare tools and materials for the construction of plastic ceiling panels

I measure the work construction of ancient ceiling to estimate the number of beams to be placed. At each wall, you deduct an amount due to the angle of 12-24 cm. Tools to support the installation of ceiling panels include:

  • Measuring tools (tape measure, protractor).
  • Marker (pencil or ballpoint pen).
  • Specialized glue.
  • Milk silicone glue.
  • Cutting machines.
  • Nail gun.
  • Plaster powder.
Measure the work to estimate the number of beams to be installed
Measure the work to estimate the number of beams to be installed

Conduct measurements, cut and graft when constructing ceiling panels

First, we use a tape measure to measure the ceiling and then measure the ceiling. Then, we mark the position to be cut on the back of the formwork to make the cut exactly. For molding containing textures, we need to pay attention to the details of the pairing so that the pattern is seamless.

Mark the installation position of ceiling panels
Mark the installation position of ceiling panels

The cutting stage needs careful attention because the installation of the formwork must be tilted according to the wall angle and joint according to the joints. The cutting angle depends on the project, but the right angle position requires you to cut at the angle 45 degrees. At straight joints, you should cut at an angle 30 degrees, this cutting angle will help the connection point between the two moldings to be more seamless.

Cut the ceiling beam at an angle of 30 degrees
Cut the ceiling beam at an angle of 30 degrees

We use the cutter by turning the cutting table clockwise to the required angle, for example 45 degrees. At this time, your left hand holds the molding bar firmly on the cutting table, your right hand pulls the saw blade down to cut the mold. The cutter ensures that the molding is cut at an exact angle, without deviation.

Cut the ceiling beam at an angle of 45 degrees
Cut the ceiling beam at an angle of 45 degrees

Install ceiling panels on the wall and connect

After cutting the beam to the standard size, we will install the ceiling beam in the corresponding position. Please use nail gun to fix the formwork to the surface of the work.

Note: nail shooting positions from the corner to the outside are about 16cm apart.

Shooting fixed nails on the ceiling
Shooting fixed nails on the ceiling

In particular, at the joint / corner jointing of the two moldings, a thin layer of iron glue should be applied. Next, you shoot nails at the junction between the 2 bars.

Apply iron glue to the joint part
Apply iron glue to the joint part

Finally, we use milk silicone glue to evenly apply both edges. In addition, you can inject glue on the back of the bar before mounting on the wall to increase its strength.

Apply milk silicone glue to the edge of the ceiling panel
Apply milk silicone glue to the edge of the ceiling panel

Handling the joint position when constructing ceiling panels

Defects caused by nailing and mounting operations can be treated with putty. Use white putty to cover the white ceiling molding or mix more colors into the putty to synchronize with the colored molding. We use more sandpaper to smooth the place of plastering, and the construction of the ceiling is completed.

Using putty to conceal the construction of ceiling molding works
Using putty to conceal the construction of ceiling molding works

See more: Video on how to build a ceiling ceiling

Note: The instructions are for the most basic construction cases of materials and are for reference only. However, there will be the most flexible and appropriate construction methods, but priority will still be given to surveying the project. specifically and propose the most reasonable construction plan.

Guide construction of ancient ceiling With all the steps above, you will be able to install the molding yourself professionally. Distributor of decorative materials Kosmos Vietnam is a supplier of quality plastic molding. The Kosmos molding collection is diverse, supporting the most perfect project renovation.

Rate Articles
Did this article help you?
Have No.