Construction accessories for wall cladding with 1 layer of flat OP148 plastic wood
1-layer wood plastic panel OP148 at Kosmos Vietnam has the following 6 product codes: GOP148X21, GOP148VG, G3DOP148X21, OP148X3M, OP148X2.2M, 3DOP148X3M.
Construction accessories kit for 1-layer wood plastic panel OP148 includes:
Accessories | Uses |
| Stainless steel or galvanized steel bars | Make skeleton for panel |
| Iron anchor | Create a joint between the wall and the rib |
| Flat head screw | Connecting OP148 panel to the frame |
| Stainless steel screw with pointed tail and flat head or copper thread nail | Connecting wood plastic V-shaped strip with panel |
| Corner Trims | Cover the end of the panel |
| Kosmos Exterior Glue | – Connecting the panels to the frame – Connecting the wood plastic V-shaped strip to the panel |
Stainless steel or galvanized steel bars form the skeleton
The crossbar is an important part to create the skeleton, as a support for the wood plastic panel. It is made of stainless steel or galvanized steel with dimensions ≥ 25x25mm and thickness ≥ 1.2mm. The crossbar helps reinforce and stabilize the structure of the panel, ensuring the aesthetics and durability of the panel from 10 to 15 years.
Iron anchors create joints between the wall and the ribs.
Iron anchors are shot into the wall through a drilled hole to create a connection between the wall and the rib. It helps to fix the rib to the wall firmly.
4 common types of iron anchors: 6mm, 8mm, 10mm and 12mm, corresponding to 4 types of drill bits: 6mm, 8mm, 10mm and 12mm.
Stainless steel screws connect the panel to the frame or connect the V-shaped strip to the panel
In the construction of 1-layer wood plastic panel OP148, there are 2 types of screws, each type has different uses such as:
- Flat head screw used to connect the panel to the frame
- Stainless steel screw with pointed tail and flat head Used to connect wood plastic V-shaped strips to panels.
Copper thread connecting V-shaped strip and panel
Copper nails are used to connect the V-shaped strip and the panel. This type of nail has a small and thin head, contributing to the aesthetics of the finished product.
Wood plastic V-shaped strip finishes and finishes the panel
3 wood-plastic V-shaped molding codes at Kosmos V60X60, V40X60 and GV40X60 are used to finish and complete the panel. In addition, it also contributes to increasing the aesthetics and uniformity of the entire project.
Kosmos exterior glue connects the panel to the frame or V-shaped strip to the panel
Kosmos exterior glue is used for:
- Connecting OP148 panel to the frame
- V-shaped strip connection with wood plastic panel.
The product is waterproof, anti-mold and has good adhesion, ensuring the stability and durability of the project.
Note the connection of the wood plastic V-shaped strip to the panel.
First, apply Kosmos exterior glue to the strip, then cover the strip to cover the end of the panel. While waiting for the glue to dry, fix the V-strip to the OP148 panel with flat-head pointed stainless steel screws or copper nails.
**Note: Other installation locations for OP148 wall panels Installation location of ceiling accessories for OP148 panel only at the joint position between the wall and ceiling panels.
Accessories to create joints between panels and walls or ceilings | |
| Walling | Ceiling tiles |
| Iron anchor | Bullet anchors, nuts, threaded rods |
Office: 281 Tan Son, Tan Son Ward, Ho Chi Minh City
