Imported wooden floor

When installing imported Laminate flooring such as Egger or Robina, thorough subfloor preparation is essential. The subfloor must be clean, dry, and level, with a height difference of no more than 2mm per square meter. Additionally, a door gap of 10-15mm should be checked to prevent the door from rubbing against the floor after installation.

Before installation, the floor should be allowed to stabilize in the construction area for approximately [number] minutes. 48 hours Allow the material to adapt to the actual temperature and humidity. When laying the foam underlayment, seal the edges with tape and ensure the foam layers do not overlap.

Regarding expansion distance, moisture-resistant lines such as Egger Aqua , and Robina Aqua You should leave a gap between the wall and the wall. 12 - 15mmPopular models include: Egger Classic , and Robina Classic We need to leave more space, approximately 15 -18mmThis allows the floor to expand and contract as the environment changes.

For areas with a length or width exceeding 7mTherefore, T-shaped trim should be used to divide the floor; finally, install baseboards and trim to cover the gaps, increasing stability and aesthetics.