What is the function of the GNC80-D black aluminum baseboard corner bracket?

The GNC80-D external corner pin is an accessory for handling convex corners. Black aluminum baseboard trim CT80-DAt locations where the wall protrudes at a 90° angle – for example, square columns, partition wall ends, wall corners – the ends of the two skirting strips meet on the outer edge of the wall. GNC80-D creates a protective border around the protruding corner, protecting the aluminum skirting from impact (as the outer corner is the point of greatest stress) and creating a consistent black aesthetic throughout.

What problem does the GNC80-D external corner lock solve at convex corners?

The protruding corner is the most vulnerable spot in a living space – people accidentally bumping into it, shopping carts colliding with it, children running into it. The GNC80-D exterior corner latch addresses four issues here:

1. Preventing dents and distortions in aluminum baseboard trim: The protruding corners are exposed and easily subjected to direct impact forces. The GNC80-D has rounded corners, dispersing the impact force instead of concentrating it on the sharp edges.
2. Protecting the aluminum core: The 1mm edge of the skirting board at the convex corner will bend or warp upon impact if not secured by a pin – The GNC80-D pin helps reinforce the edge of the skirting board.
3. Create smooth curves: Instead of the two ends of the splint facing each other at a sharp angle, the pin creates a gentle curve – aesthetically pleasing and safe to touch.
4. Matching black tones: With a uniform black finish, the black wool band provides an uninterrupted visual effect at the convex corner.

How to install the GNC80-D external corner bolt?

The installation process for the GNC80-D external corner bolt includes 3 steps:

1. Attach the base lock to the outer corner of the wall.
2. Position the GNC80-D bolt in the outer corner.
3. Attach the aluminum baseboard to the base lock, aligning the end of the trim with the outer corner pin.

When should you use GNC80-D, and when should you use other accessories when installing the CT80-D black aluminum baseboard trim?

GNC80-D is for exterior corner use only – not compatible with other wall corner shapes.

See more: CT80-D aluminum baseboard trim and accessories, black color.

How to clean and maintain the GNC80-D aluminum corner skirting board accessory?

Here's how to clean and maintain the GNC80-D exterior corner accessory of the aluminum baseboard trim:

1. Wipe the outer curved surface with a soft, damp cloth.
2. The solution has a pH of 6-8. Do not use bleach or abrasive cleaning tools.
3. Check regularly every 3-6 months, and tighten if loose.

Detailed video of black aluminum baseboard trim and external corner bracket accessories:

The GNC80-D black exterior corner bracket serves a dual purpose: protecting the aluminum baseboard at its most vulnerable point (the protruding corner) and maintaining the black color across the entire baseboard. This accessory transforms sharp, easily damaged corners into a sturdy, safe, and smooth curved edge. It's especially important for high-traffic areas: hallways, lobbies, offices, and showrooms – where corners are constantly subjected to impact.