What is the purpose of the DC80B-T white aluminum baseboard end pin?

The DC80B-T end cap is an accessory that seals the right end of the white CT80-T aluminum baseboard. This product addresses the issue of exposed metal at the end of the baseboard – creating a rounded, uniformly white finish that is safe for users and prevents dust and moisture from entering. The DC80B-T ensures the aesthetic continuity of the white baseboard system, even at easily overlooked end points.

DC80B-T is the right end pin for the white aluminum baseboard CT80-T.

What is the function of the white DC80B-T terminal block?

The DC80B-T performs three key functions at the right end of the CT80-T laser bar:

Cover the cross-section: After cutting the aluminum bar to the length of the room, the metal cut surface must be exposed – the pins are then wrapped to create a perfect white surface.
Safe handling: The sharp edges of the aluminum frame pose a risk of skin cuts – the soft, rounded edges make it safer for households with young children.
Prevent dirt and dust: The open end is a gateway for dust, water, and small insects to get into the gap behind the wool. The DC80B-T clasp helps seal this gap.

The DC80B-T end pin is used for the white aluminum baseboard.

Which accessories work well with the DC80B-T end cap when installed with the CT80-T white baseboard?

Construction situation	Required accessories
The left end of the yarn	Left end pin DC80A-T
90° recessed corner	Corner pin in GTC80-T
90° protruding wall corner	GNC80-T Outer Corner Lock
Connect two consecutive bars.	NC80-T connector

Note: The DC80B-T is only for use when the lens STOPS at the right position – not for use when joining or rounding the corners of the lens.

See more: CT80-T aluminum skirting board set and accessories in white.

How to properly store the white DC80B-T accessory?

Because it is white, the DC80B-T accessory requires proper cleaning procedures to maintain its shine:

Wipe with a damp cloth and dry immediately afterward.
The solution should have a pH of 6-8 and contain no strong acid or alkali detergents.
Treat colored stains (coffee, tea, sauce) immediately before they soak in and cause discoloration.
Do not scrub with abrasive materials.
Check for proper adhesion every 3-6 months.

Detailed video of the white aluminum skirting board and end cap:

The DC80B-T end clip is the finishing accessory that completes the right-hand stop of the CT80-T white aluminum skirting board. This accessory ensures the white skirting board system maintains a seamless finish from start to finish, without any exposed metal parts disrupting the design.