Stainless steel angle bar with self-adhesive LA20D-DG, mirror black

Stainless steel angle bar with pre-glued strip LA20D-DG is the product decorative brace, made from stainless steel High-grade 201, 20mm wide, 1000mm long, 0,4mm thickThe surface is plated with black PVD mirror to help the product achieve high mirror gloss, luxury and color fastness over time.

If the 15mm version brings a gentle sophistication, then the 20 mm of LA20D-DG again shows strength, stands out more on the material background. Tone black mirror reflects light softly, creating an extremely attractive depth effect – especially when combined with white walls, concrete floors, wooden slats or warm yellow light.

Why should you choose LA20D-DG black mirror stainless steel adhesive strip for modern space?

More than just a decorative accessory, LA20D-DG is also a detail that helps complete the design with high definition. Below is 4 outstanding advantages makes this product popular:

1. Quick and convenient construction thanks to pre-glued adhesive: No need for special tools, just peel off the adhesive film and stick directly to the desired surface. The optimal solution for interior finishing in a short time.
2. PVD plated surface is bright and hard to fade: PVD coating technology helps stainless steel maintain a stable mirror black color without peeling. The reflection adds depth and luxury to the space.
3. 20mm wide – creates a prominent border: Compared to the small version, this version helps the outline to be clearer and more attractive, suitable for areas that need clear highlights such as TV walls, ceilings, and display cabinets.
4. Rust-proof and easy to clean: Thanks to the durable properties of 201 stainless steel, the molding is not affected by indoor humidity, helping to keep the surface looking like new.

Stainless steel bar LA20D-DG is suitable for which spaces?

With large design and Power Mirror Black, LA20D-DG Suitable for spaces that want to express personality and luxury. Specifically:

1. Living room, bar, reception hall: Creates bold decorative borders, allowing light to reflect delicately on the surface.
2. Bedroom or office: Create accent wall borders, mirror borders, combine industrial or modern luxury style.
3. Interior cabinets and shelves: Cabinet edges, table tops, and glass frames make the product look more high-end.
4. Commercial space – showroom, spa: Shows modern, luxurious aesthetic taste, easy to make visual impression.

How to install LA20D-DG stainless steel strip to make it strong and beautiful?

The correct technical process of gluing the strip helps ensure high adhesion and aesthetics. Below are 3 standard construction steps You should follow:

1. Surface preparation and cleaning: Clean the area of ​​application of dust, grease and moisture. If the surface is flat, the strip will adhere better.
2. Measure and cut the splint to size: Use a ruler and pen to mark the length of the strip you want to apply. Cut the strip with stainless steel scissors or a utility knife to get a clean edge.
3. Peel off the adhesive film and stick it in place: Smooth evenly from the beginning to the end of the strip to ensure the glue sticks firmly.

Notes when cleaning and preserving LA20D-DG black mirror stainless steel strip

To keep the surface of the molding shiny like a mirror, users need to pay attention to the following points:

1. Use a soft, slightly damp cloth to wipe: Do not use hard brushes or metal scouring pads as they can scratch the coating.
2. Avoid contact with sharp objects: During use, avoid collision with sharp tools or objects to avoid scratching the splint.
3. Do not use strong cleaning chemicals: It is recommended to choose a cleaning solution with a neutral pH (≈7). Acid or alcohol may tarnish the PVD mirror layer.
4. Dry after cleaning: Standing water can leave streaks or stains, so wipe with a soft dry cloth after cleaning.

With proper maintenance, LA20D-DG brace can maintain freshness in 10–15 years – equivalent to the lifespan of many other high-end interior materials such as stone-patterned PVC and Nano panels.

The aesthetic effect that the black mirror LA20D-DG strip brings to the design

Tone black mirror is a symbol of luxury and sophistication. When combined with golden light or light-colored surfaces, LA20D-DG brace create strong contrast, making the space more modern and deeper.

20mm wide strip is suitable for projects that emphasize architectural linesEach light-reflecting strip makes the space more "eye-catching" without needing too many additional decorative details.

Possessing luxurious beauty, easy construction and outstanding durability, LA20D-DG stainless steel bar, mirror black, 20mm wide is the perfect choice for those who love high-class, minimalist interior style. Small details but create lighting effects and great depth, helping each space exude modern and professional beauty.