Polymer coated 2-layer wood plastic flooring S145T22 Teak (orange yellow)

S2T145 Teak (orange yellow) 22-layer polymer-coated wood plastic floor is an advanced composite material made from 55% natural wood powder, 35% HDPE plastic and 10% additives with a 0.1-0.8mm thick polymer coating, creating a product with high durability and aesthetics for exterior works.

Special structure of 2-layer polymer-coated wood-plastic flooring S145T22 orange-yellow

2-layer S145T22 orange-yellow wood plastic floor has a uniform structure with 60 mesh fine wood powder accounting for 55% of the composition, ensuring the product surface has realistic natural wood grain and high aesthetics.

HDPE (High-Density Polyethylene) plastic with a density of 0,93-0,97g/cm³ accounting for 35% helps the product achieve impact resistance of 13,9J according to ASTM D4226-19e1 standard, equivalent to withstanding a 1.4kg object falling from a height of 1m without cracking.

Additives account for 10% of the composition, including ultraviolet absorber, antioxidant, mold inhibitor, Compatibilizer, and lubricant.

In particular, this material also has a 0,1-0,8mm thick Polymer coating that not only increases scratch resistance but also limits fading under the impact of harsh weather.

Basic specifications of 2-layer polymer-coated wood plastic flooring S145T22 Teak

Polymer coated 2-layer wood plastic flooring S145T22 Teak usually has the following basic technical parameters:

Why is the S2T145 orange-yellow 22-layer round hole wood plastic floor increasingly popular?

The orange-yellow S2T145 22-layer round-hole wood-plastic flooring is increasingly popular due to the combination of many factors, especially the advantages compared to traditional flooring materials and its suitability with modern design trends. Here are the main reasons:

High aesthetics and limited fading

Advanced production technology allows 2-layer plastic wood to realistically simulate natural wood grain patterns, bringing a warm feeling like using real wood. The characteristic orange-yellow color of Teak wood is subtly reproduced, creating a luxurious and modern beauty for the space.

The outer Polymer layer acts as a comprehensive protective layer with many important functions. This coating is not only effective in waterproofing and scratch resistance, but also has superior UV resistance, helping to keep the product's color stable throughout use. This minimizes fading or yellowing over time.

Good surface hardness and elastic recovery

S2T145 22-layer round hole outdoor wood plastic flooring has a Brinell hardness of 64MPa and a high elastic recovery rate of 53% according to EN 15534-1:2014+A1:2017 Section 7.5 standard. The hardness index of 64MPa helps the material surface effectively resist dents caused by concentrated pressure such as high heels, table and chair legs or falling objects - frequent impacts during use.

The 53% springback means that the material can recover more than half of its deformation when the pressure is removed. This helps maintain the aesthetics and durability of the surface even after many years of use, especially important in high traffic areas such as terraces, walkways and pool areas.

Good impact resistance

The S2T145 22-layer polymer-coated wood plastic flooring has high impact resistance with a value of 13,9J when tested according to ASTM D4226-19e1 Procedure A. In actual use, this level of 13,9J is equivalent to the ability to withstand the impact of a 1,4kg object falling from a height of 1m without cracking or permanent deformation.

This strength is especially important for outdoor floors, stairs and high-traffic areas where the material is constantly subjected to impact from moving furniture, falling objects or daily activities. This ability helps the product maintain its original strength and shape throughout its long-term use.

Frequently asked questions when using outdoor round hole 2-layer wood plastic flooring S145T22 orange yellow

What is the installation distance of the frame for S145T22 wood plastic floor?

Standard frame spacing is 200 – 450mm depending on the load used. The frame material is stainless steel or galvanized steel bar with size ≥30x30mm, thickness ≥1,4mm.

Does S2T145 Teak 22-layer Polymer-coated wood plastic flooring expand and shrink seasonally?

S2T145 Teak Polymer Coated 22-layer wood plastic flooring is designed to minimize expansion and shrinkage due to seasonal changes in temperature and humidity. With an expansion rate of only 0,1%, this product has high stability, maintaining the quality and long-lasting beauty of the project.