OP2D Teak 156-layer Polymer-coated outdoor wood plastic panel

OP2D Teak (orange yellow) 156-layer polymer-coated outdoor wood-plastic panel is an advanced composite material, specially designed for decorating and protecting outdoor spaces. Standing out with its warm, luxurious orange-yellow color and super durable polymer coating, this product not only brings natural beauty but also ensures superior resistance to harsh weather factors.

Basic specifications of OP2D Teak 156-layer Polymer-coated outdoor wood plastic panel

OP2D Teak 156-layer polymer-coated outdoor wood-plastic panel is also known as 2-layer wood-plastic panel. This material is manufactured with standard size of 156 x 21 x 3000mm, effective size is 134 x 21 x 3000mm. In which, the size is the size minus the locking groove of the product. Below are the basic technical parameters of 2-layer wood-plastic panel code OP156D orange-yellow.

Composition of 2-layer outdoor wood plastic panel covered with Polymer OP156D Teak

OP2D Teak 156-layer Polymer-coated outdoor wood-plastic panel is made of 55% wood powder (smooth 60 mesh), 35% HDPE plastic (density 0,93–0,97g/cm³) to help resist impact, and 10% additives (UV absorber, antioxidant, mold inhibitor, bonding additive to increase plastic flowability, lubricant). The 0,1-0,8mm thick Polymer coating increases scratch resistance, limits fading and creates color diversity for the product.

What are the advantages of OP2D orange-yellow 156-layer outdoor wood plastic panel?

OP2D 156-layer outdoor wood plastic panel in orange-yellow color brings 4 main advantages thanks to its special structure and modern Polymer coating.

Long lasting durability up to 20 years

Thanks to modern extrusion technology and special components, the product has a lifespan of up to 20 years. This ensures that the panel maintains stable quality and beauty over many years of use and is less affected by harsh weather conditions.

Outstanding dimensional stability with low coefficient of thermal expansion

OP2D Teak 156-layer wood plastic panel has a linear thermal expansion coefficient of 73×10⁻⁶ K⁻¹. This important parameter is determined according to prestigious international standards such as EN 15534-1:2014+A1:2017 Section 9.2 & ISO 11359-1-2014 & ISO 11359-2-1999 Method A. This result shows that the material is able to withstand temperature changes well in outdoor environmental conditions without significant deformation, ensuring the stability of the cladding surface over many years of use.

Impressive load-bearing capacity

The 2-layer polymer-coated wood plastic product has a bending force of up to 36MPa and a bending modulus of elasticity of 3.73GPa. These values ​​are determined according to the EN 15534-1:2014+A1:2017 Annex A standard, showing that the material has the ideal stiffness to withstand heavy loads without sagging or deformation.

Anti-fading, easy to clean

With a high-quality Polymer coating, the OP2D Teak 156-layer wood-plastic panel can realistically simulate natural wood grain patterns, giving the feeling of using real wood. The outer Polymer layer is not only waterproof and scratch-resistant but also has good UV resistance. This helps to keep the Teak color (orange yellow) of the product stable, limiting fading during use.

Frequently asked questions when using outdoor wood plastic panels 2 layers OP156D orange yellow

What is the water absorption of OP156D Teak wood plastic panel?

According to test method EN 15534-1:2014 Section 9.6.1 & EN ISO 11925-2:2020, 2-layer Polymer coated wood plastic has maximum water absorption of 0,05%This property helps the material maintain structural stability and limit mold and rot, even in high humidity environments.

Is it difficult to clean and maintain 2-layer wood plastic panels?

The 2-layer wood plastic surface has a Polymer coating that limits dirt adhesion and is easy to clean with water and regular soap. No need to sand or repaint regularly.