Construction accessories for ceiling paneling with 1 layer of flat OP148 plastic wood
1-layer wood plastic panel OP148 at Kosmos Vietnam has the following 5 product codes: GOP148X21, GOP148VG, G3DOP148X21, OP148X3M, 3DOP148X3M.
Construction accessories set for OP1 148-layer wood plastic ceiling panel includes:
Accessories | Uses |
| Stainless steel or galvanized steel bars | Make skeleton for panel |
| Bolts, nuts, threaded rods | Create a joint between the ceiling and the joists |
| Flat head screw | Connecting OP148 panel to the frame |
| Stainless steel screw with pointed tail and flat head or copper thread nail | Connecting wood plastic V-shaped strip with panel |
| Corner Trims | Cover the end of the panel |
| Kosmos Exterior Glue | – Connecting the panels to the frame – Connecting the wood plastic V-shaped strip to the panel |
Stainless steel or galvanized steel bars form the skeleton
The crossbar is an important part to create the skeleton, as a support for the wood plastic panel. It is made of stainless steel or galvanized steel with dimensions ≥ 25x25mm and thickness ≥ 1.2mm. The crossbar helps reinforce and stabilize the structure of the panel, ensuring the aesthetics and durability of the panel from 10 to 15 years.
Bullet anchors, nuts, threaded rods create connections between ceiling and crossbar
Bullet plug (expansion) is drilled into the ceiling to connect with threaded rods and nuts (ecu, nut) has the task of tightening the threaded rod into the bullet anchor. At this time, the threaded rod acts as a connection between the ceiling and the frame.
Stainless steel screws connect the panel to the frame or connect the V-shaped strip to the panel
In the construction of OP1 148-layer wood plastic ceiling panels, there are 2 types of screws below, each type has different uses such as:
- Flat head screw used to connect the panel to the frame
- Stainless steel screw with pointed tail and flat head Used to connect wood plastic V-shaped strips to panels.
Wood plastic V-shaped strip finishes and finishes the panel
3 wood-plastic V-shaped molding codes at Kosmos V60X60, V40X60 and GV40X60 are used to finish and complete the panel. In addition, it also contributes to increasing the aesthetics and uniformity of the entire project.
Copper thread connecting V-shaped strip and panel
Copper nails are used to connect the V-shaped strip and the panel. This type of nail has a small and thin head, contributing to the aesthetics of the finished product.
Kosmos exterior glue connects the panel to the frame or V-shaped strip to the panel
Kosmos exterior glue is used for:
- Connecting OP148 panel to the frame
- V-shaped strip connection with wood plastic panel.
The product is waterproof, anti-mold and has good adhesion, ensuring the stability and durability of the project for up to 15 years.
Note on the connection of the wood plastic V-shaped strip to the panel:
First, apply Kosmos exterior glue to the strip, then cover the strip to cover the end of the panel. While waiting for the glue to dry, fix the V-strip to the OP148 panel with flat-head pointed stainless steel screws or copper nails.
**Note: The installation location of ceiling accessories for OP148 panels is different from the installation location of wall accessories for OP148 panels only at the connection position between the panel and the ceiling.
Accessories to create joints between panels and walls or ceilings | |
| Ceiling tiles | Walling |
| Bullet anchors, nuts, threaded rods | Iron anchor |
Office: 281 Tan Son, Tan Son Ward, Ho Chi Minh City
