Price list for 6 newest types of beautiful, easy-to-use vinyl floors

Rolled vinyl flooring is a cheap residential flooring material, produced in very large sheets (width: 2 - 3m, length 20 - 50m, thickness 1 - 3mm). Therefore, we can just roll it up to save storage space. The product has a 5-layer structure from top to bottom including:

• Anti-fading UV coating.
• 0.15mm thick nano coating resists abrasion.
• Decorative paper layer.
• PVC layer
• The base layer has high adhesive adhesion.

The floor is constructed with glue but it is not available, we have to buy glue separately and apply it to the floor before gluing. Because it is so soft and thin, this type of floor is very picky about the substrate, requiring the substrate to be absolutely flat if you do not want to have rough spots on the floor.

There is a type of flooring material that looks very similar to rolled vinyl flooring but is cheaper imitation wood simili floor mats.

Antibacterial vinyl flooring (also known as homogeneous vinyl flooring) is a specialized flooring material for hospitals. Many schools and research laboratories also use this type of flooring to protect users' health and ensure that bacteria cannot enter the space.

The structure of this type of floor is very simple and includes:

• The rough surface layer helps the glue bond better.
• The core layer of virgin PVC plastic is mixed with additives for stabilization and coloring powder to create decorative patterns.
• Surface coating (PUR adhesive layer or UV coating) prevents scratches, fading and water absorption.

In our lives, electricity and phenomena are indispensable electrostatic not rare. This phenomenon causes many troubles in life that we always find ways to eliminate. Use anti-static vinyl flooring is one of them.

Inside anti-static vinyl flooring only one carbon chain system, often used for workspaces with many electronic devices such as: phone factories, computer rooms, labs,... with the following operating principles:

• The substrate must be cleaned to achieve the highest antistatic effect.
• Below the platform will be equipped with a system copper wire size 3x3mm, connected to ground or conductive steel pole.
• Apply conductive glue to bond the anti-static vinyl floor to the floor.
• Finally, we create a v-shaped groove between the panels and then use a stick hot weld the joints. Don't forget to trim the excess and clean the floor before handing over/using.

Glued vinyl flooring is a flooring material made of PVC, in the form of rectangular planks, installed with glue purchased from outside. The product is quite flexible, can be bent without breaking. You can install glued plastic flooring yourself at home following the instructions in the video below.

Vinyl floors come with pre-adhesive adhesive Used to beautify floors, save costs and have high convenience. Many people also call this product "self-adhesive wooden floor" or "peel-stick wooden floor" because the base of the floorboard already has glue, we just need to peel off the protective paper layer to install it on the floor.

It is very difficult to choose between glued and pre-glued vinyl floors. You can make a better decision after reading the article "Should I use self-adhesive laminate flooring instead of glued vinyl flooring?".

Vinyl flooring has locking seams PVC floors are mixed with stone powder, we can call them plastic floors SPC (Stone Plastic Composite). The floorboards are bar-shaped, extremely sturdy and easy to install thanks to the smart locking system on the edge of the board. No need for glue, the boards will be linked by joining the "negative seam" to the "positive seam", please refer to the following video to better understand how to install this type of floor.