Plastic floor newsletter
Are plastic floors with rubber soles good? Beautiful patterns
Rubber sole plastic floor is a locking plastic floor with a layer of IXPE or EVA foam on the base. The presence of a built-in foam layer helps us eliminate the need to spread foam panels during installation. They shorten construction time while still ensuring the smoothness of the floor when moving, increasing effective heat insulation and noise protection.
Compare the IXPE foam layer and the EVA foam layer of rubber-soled plastic flooring
EVA foam layer | IXPE base layer | |
Concept | EVA foam layer (Ethylene Vinyl Acetate) is produced by an in-mold chemical foaming process, based on the copolymerization of Ethylene and Vinyl Acetate.
Thin layers of EVA foam sometimes have to go through a process of joining and planing, causing the surface to be uneven and less aesthetically pleasing. To extend the product, welding between EVA layers will take place and the welds will not ensure the durability of the entire product. |
This is a foam layer made from Polyethylene (PE), after undergoing a continuous foaming process at high temperature. Its molecular structures are tightly interconnected, providing a smooth, flat surface.
Because of the close connection of the molecular structure and many independent bubbles inside, the IXPE foam layer has low thermal conductivity and high thermal insulation properties. IXPE foam layer has high mechanical properties, good durability and effective aging resistance. |
Safety | Low (there are harmful substances in the chemical foaming process). | High (no additives). |
Odor | There is a bad smell. | Odourless. |
Elasticity | Better. | Worse. |
Reliability | Lower (affected by joints). | Higher. |
Waterproof | Relative (because the surface contains tiny holes). | Better (due to smooth surface). |
Price | Lower. | Higher. |
Illustration |
Plastic floor structure with IXPE rubber sole
Plastic floor with IXPE rubber sole Has a 5-layer structure and a smart locking system (negative-positive coupling), specifically:
This layer can limit the fading of the floor when exposed to sunlight. However, plastic flooring is a material specifically used in interior spaces, please do not install it in outdoor areas or places with frequent sunlight.
Thick coating 0.3 mm Capable of protecting decorative grain layers from damage caused by scratches and friction. It is best not to drag heavy objects/sharp objects on the floor to ensure durability and high aesthetics.
Rubber-soled plastic flooring can imitate natural wood flooring with a delicate decorative wood grain layer. Not only that, modern printing technology also makes it easy for floors to imitate unique cement floors or luxurious marble floors.
The SPC (Stone Plastic Composite) core layer is made from the main ingredient: PVC virgin, mixed with stone powder. It is not affected by humidity and is 100% termite-proof. The edge is trimmed into a joint system that helps link the individual floorboards together.
The IXPE foam layer is tightly pressed into the plastic core layer, ensuring it does not separate during use. They form a comfortable, alternative mattress Foam lining sheet To protect flooring from harmful agents from the foundation and to insulate sound and heat.
>>> Watch more videos comparing rubber-soled plastic floors with other types of plastic floors.
6 reasons to use rubber-soled plastic flooring
6 reasons to use rubber-soled plastic flooring are:
- Reusable.
- Heat insulation, noise protection.
- 100% termite resistant.
- Waterproof, easy to clean.
- Durable, good anti-slip.
Rubber-soled plastic floors can be reused many times
This is a floor covering material that is installed floatingly (not fixed to the floor with nails or glue), and can be easily removed to be installed in another location. What we need to do is remove the board, clean the base, dry it and finally install it.
Thermal insulation - Anti-noise, bringing a comfortable feeling
Rubber sole plastic floor Transmits a stable temperature, keeping the space cool at noon in the summer, or creating a comfortable feeling for bare feet when the cold winter comes. Not only that, they also limit annoying noises to make the space quieter and more comfortable.
Wooden imitation plastic floors with rubber soles are not attacked by termites
Plastic material ensures that the flooring material is never attacked by termites or any other insects. This reduces maintenance costs significantly when compared to natural wood floors. This is also the reason wood plastic floor always sought after by users.
Rubber-soled imitation stone plastic flooring adorns the interior space
Besides wood grain, cement concrete stone grain is very popular in this item. Belonging to the industrial style, they have a natural and unconventional rustic beauty. The gray color of cement concrete has a very unique beauty, the beauty of simplicity. The space will be even more upgraded if you know how to combine it with other decorative materials.
>>> See more: Price of 4 types of faux stone plastic floors.
Wood-grain plastic floor with rubber sole, good water resistance
Installed in an area near the toilet, where water is often exposed, will not damage the rubber-soled wood-grain plastic floor. The product does not deform when exposed to water, can be cleaned regularly with a damp cloth and is good for use in areas with hot weather (high humidity).
Rubber-soled plastic flooring is durable and anti-slip for installing stair treads
Plastic floors with rubber soles have good bearing capacity. Not only that, they are also anti-slip so they are extremely safe when installing on stair treads. Thanks to the friction surface, children do not easily slip and fall when running, jumping, and playing.
6 steps to install plastic flooring with rubber soles
B1 Prepare a flat, clean and dry surface
Note: The ground surface must not deviate more than 2mm/1m.
B2 Prepare tools to install plastic floors with rubber soles
- Rubber sole plastic floor.
- Wool/Splint.
- Rubber hammer.
- Paper knives.
- Measure.
B3 Fix the base of the brace to the floor before installing the board (if any).
B4 Measure and cut the plastic floorboard with the rubber sole with a cutter
B5 Install rubber-soled plastic flooring with locking joints
B6 Install the braces and baseboards and you're done
- Skirting: Install at the intersection between wall and floor to cover gaps.
- Splint F: Use at the end of plastic floors or replace skirting boards.
- Splint: Used at the intersection between 2 floorboards to connect (at the door).
- Splints: Install at right angles, at the top of steps/stairs.
>>> See more videos of rubber sole locking plastic flooring construction below!
>>> See more notes when constructing rubber-soled plastic floors here!
Beautiful IXPE rubber-soled plastic floor model
Kosmos – Reputable general warehouse and distributor of rubber-soled plastic flooring
Kosmos Vietnam is a reputable distributor of plastic flooring with rubber soles. Kosmos rubber-soled plastic flooring There is a core layer made from virgin PVC and stone powder to help ensure safety for users' health. Above all, the base layer is made from quality IXPE foam, which significantly enhances the durability of the product. The floor's lifespan can be up to 10 years with a 3-year quality warranty commitment.
IXPE rubber-soled plastic flooring of Kosmos is currently present in 63 provinces and cities. If you need to purchase and install, you can contact Kosmos to receive information about the nearest dealer. In addition, we always welcome new members to join. You can see more Kosmos dealer policy here or call now via number 0903 093 221 for advice.
- https://www.greenerawood.com/tin-tuc/vat-lieu-day-lot-ixpe-va-eva-la-gi-loai-nao-tot-nhat-cho-san-nhua-spc-185.html
- https://santot.vn/tu-van/nen-chon-san-nhua-co-san-de-ixpe-eva-hay-khong-co-de-7851.html
- https://vansannhua.com/so-sanh-san-nhua-de-eva-va-san-nhua-de-ixpe/
- https://sangotoanthang.com/san-nhua-de-cao-su/
- https://vansannhua.com/san-nhua-de-cao-su/
Kim Hoa is an expert in interior and exterior decorative materials at Kosmos Vietnam. She has professional knowledge of interior design and loves finding creative ways to optimize space with simple construction decoration materials such as wood, stone, bamboo, brick and plastic.
Kim Hoa Regularly participate in seminars and exhibitions on interior decoration materials to update the latest trends, as well as to learn more about interior decoration materials. Meet interior and exterior designers, architects, and material experts to continuously learn. She also actively shares her knowledge and experience on social media channels such as Facebook, YouTube, Tiktok... with more than 100 thousand followers.
Mission of Kim Hoa not merely providing information, but also ensuring that All information posted is quality, has in-depth investment and is most useful to viewers.
- Rubber-soled wooden flooring: Specifications, structure, features, 4 beautiful models and price quote
- Quote the best 6 types of laminate flooring and construction notes
- The most popular types of industrial wood floor locks today
- 99+ beautiful, luxurious, genuine Korean wallpaper models, good prices
- Guide to choosing the thickness of laminate flooring
Related articles of interest:
- Galawood plastic wood newsletter
- Kosmos plastic wood newsletter
- Newsletter Kosmos
- Korean Wave Newsletter
- Newsletter fluted panel Kosmos
- Korean molding news
- Stone PVC Newsletter
- Laminate flooring newsletter
- Egger laminate flooring newsletter
- Galamax laminate flooring newsletter
- Kosmos laminate flooring newsletter
- Povar laminate flooring newsletter
- Robina Flooring Newsletter
- Newsletter Thaixin laminate flooring
- Plastic floor newsletter
- Newsletter plastic wall panels
- Newsletter of bamboo charcoal panels
- Bulkhead newsletter
- agents
- Accessories consultation
- Wiki - Interior and exterior trends
Plastic floor newsletter
Experience in choosing to buy durable, beautiful, good-priced faux wood plastic flooring
Plastic floor newsletter